Bearbeiten von „Geschichte/Server/higgs/dmesg“
Aus UUGRN
Warnung: Du bist nicht angemeldet. Deine IP-Adresse wird bei Bearbeitungen öffentlich sichtbar. Melde dich an oder erstelle ein Benutzerkonto, damit Bearbeitungen deinem Benutzernamen zugeordnet werden.
Die Bearbeitung kann rückgängig gemacht werden. Bitte prüfe den Vergleich unten, um sicherzustellen, dass du dies tun möchtest, und speichere dann unten deine Änderungen, um die Bearbeitung rückgängig zu machen.
Aktuelle Version | Dein Text | ||
Zeile 5: | Zeile 5: | ||
Copyright (c) 1992-2012 The FreeBSD Project. | Copyright (c) 1992-2012 The FreeBSD Project. | ||
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | ||
− | + | The Regents of the University of California. All rights reserved. | |
FreeBSD is a registered trademark of The FreeBSD Foundation. | FreeBSD is a registered trademark of The FreeBSD Foundation. | ||
− | FreeBSD 9. | + | FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012 |
root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 | root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 | ||
− | CPU: | + | CPU: AMD Athlon(tm) 64 Processor 3800+ (2394.32-MHz K8-class CPU) |
− | Origin = " | + | Origin = "AuthenticAMD" Id = 0x50ff2 Family = f Model = 5f Stepping = 2 |
− | Features= | + | Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> |
− | Features2= | + | Features2=0x2001<SSE3,CX16> |
− | AMD Features= | + | AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> |
− | AMD Features2= | + | AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8> |
− | + | real memory = 4294967296 (4096 MB) | |
− | real memory = | + | avail memory = 4069847040 (3881 MB) |
− | avail memory = | ||
Event timer "LAPIC" quality 400 | Event timer "LAPIC" quality 400 | ||
− | ACPI APIC Table: < | + | ACPI APIC Table: <022808 APIC1145> |
− | + | ioapic0 <Version 2.1> irqs 0-23 on motherboard | |
− | |||
− | |||
− | |||
− | |||
− | ioapic0 <Version 2. | ||
kbd1 at kbdmux0 | kbd1 at kbdmux0 | ||
− | acpi0: < | + | acpi0: <CTL COMPUTER> on motherboard |
acpi0: Power Button (fixed) | acpi0: Power Button (fixed) | ||
+ | acpi0: reservation of fee00000, 1000 (3) failed | ||
+ | acpi0: reservation of ffb80000, 80000 (3) failed | ||
+ | acpi0: reservation of fff80000, 80000 (3) failed | ||
+ | acpi0: reservation of 0, a0000 (3) failed | ||
+ | acpi0: reservation of 100000, ddf00000 (3) failed | ||
+ | Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 | ||
+ | acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 | ||
cpu0: <ACPI CPU> on acpi0 | cpu0: <ACPI CPU> on acpi0 | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | ||
pci0: <ACPI PCI bus> on pcib0 | pci0: <ACPI PCI bus> on pcib0 | ||
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 | pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 | ||
pci1: <ACPI PCI bus> on pcib1 | pci1: <ACPI PCI bus> on pcib1 | ||
− | vgapci0: <VGA-compatible display> port | + | vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xfc000000-0xfdffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1 |
− | + | pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | pcib2: <ACPI PCI-PCI bridge> at device | ||
pci2: <ACPI PCI bus> on pcib2 | pci2: <ACPI PCI bus> on pcib2 | ||
− | + | re0: <RealTek 810xE PCIe 10/100baseTX> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2 | |
− | + | re0: Using 1 MSI message | |
− | + | re0: Chip rev. 0x34000000 | |
− | + | re0: MAC rev. 0x00000000 | |
− | + | miibus0: <MII bus> on re0 | |
− | + | rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 | |
− | + | rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow | |
− | + | re0: Ethernet address: 00:19:db:68:58:88 | |
− | + | ahci0: <ATI IXP600 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 18.0 on pci0 | |
− | + | ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | ahci0: < | ||
− | ahci0: AHCI v1. | ||
ahcich0: <AHCI channel> at channel 0 on ahci0 | ahcich0: <AHCI channel> at channel 0 on ahci0 | ||
ahcich1: <AHCI channel> at channel 1 on ahci0 | ahcich1: <AHCI channel> at channel 1 on ahci0 | ||
ahcich2: <AHCI channel> at channel 2 on ahci0 | ahcich2: <AHCI channel> at channel 2 on ahci0 | ||
ahcich3: <AHCI channel> at channel 3 on ahci0 | ahcich3: <AHCI channel> at channel 3 on ahci0 | ||
− | + | ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 19.0 on pci0 | |
− | + | usbus0: <OHCI (generic) USB controller> on ohci0 | |
− | pci0: <serial bus, SMBus> at device | + | ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 17 at device 19.1 on pci0 |
− | orm0: <ISA Option | + | usbus1: <OHCI (generic) USB controller> on ohci1 |
+ | ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.2 on pci0 | ||
+ | usbus2: <OHCI (generic) USB controller> on ohci2 | ||
+ | ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 17 at device 19.3 on pci0 | ||
+ | usbus3: <OHCI (generic) USB controller> on ohci3 | ||
+ | ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at device 19.4 on pci0 | ||
+ | usbus4: <OHCI (generic) USB controller> on ohci4 | ||
+ | ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 19 at device 19.5 on pci0 | ||
+ | ehci0: AMD SB600/700 quirk applied | ||
+ | usbus5: EHCI version 1.0 | ||
+ | usbus5: <EHCI (generic) USB 2.0 controller> on ehci0 | ||
+ | pci0: <serial bus, SMBus> at device 20.0 (no driver attached) | ||
+ | atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 | ||
+ | ata0: <ATA channel 0> on atapci0 | ||
+ | isab0: <PCI-ISA bridge> at device 20.3 on pci0 | ||
+ | isa0: <ISA bus> on isab0 | ||
+ | pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 | ||
+ | pci3: <ACPI PCI bus> on pcib3 | ||
+ | re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 21 at device 3.0 on pci3 | ||
+ | re1: Chip rev. 0x04000000 | ||
+ | re1: MAC rev. 0x00000000 | ||
+ | miibus1: <MII bus> on re1 | ||
+ | rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 | ||
+ | rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow | ||
+ | re1: Ethernet address: 00:18:e7:16:48:56 | ||
+ | acpi_button0: <Power Button> on acpi0 | ||
+ | attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 | ||
+ | Timecounter "i8254" frequency 1193182 Hz quality 0 | ||
+ | Event timer "i8254" frequency 1193182 Hz quality 100 | ||
+ | atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 | ||
+ | Event timer "RTC" frequency 32768 Hz quality 0 | ||
+ | hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 | ||
+ | Timecounter "HPET" frequency 14318180 Hz quality 950 | ||
+ | atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 | ||
+ | atkbd0: <AT Keyboard> irq 1 on atkbdc0 | ||
+ | kbd0 at atkbd0 | ||
+ | atkbd0: [GIANT-LOCKED] | ||
+ | orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0 | ||
sc0: <System console> at flags 0x100 on isa0 | sc0: <System console> at flags 0x100 on isa0 | ||
sc0: VGA <16 virtual consoles, flags=0x300> | sc0: VGA <16 virtual consoles, flags=0x300> | ||
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 | vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 | ||
− | |||
− | |||
− | |||
− | |||
ppc0: cannot reserve I/O port range | ppc0: cannot reserve I/O port range | ||
− | + | acpi_throttle0: <ACPI CPU Throttling> on cpu0 | |
− | + | acpi_throttle0: CLK_VAL field overlaps THT_EN bit | |
− | + | device_attach: acpi_throttle0 attach returned 6 | |
− | + | powernow0: <PowerNow! K8> on cpu0 | |
− | + | device_attach: powernow0 attach returned 6 | |
− | |||
− | |||
− | |||
Timecounters tick every 1.000 msec | Timecounters tick every 1.000 msec | ||
usbus0: 12Mbps Full Speed USB v1.0 | usbus0: 12Mbps Full Speed USB v1.0 | ||
usbus1: 12Mbps Full Speed USB v1.0 | usbus1: 12Mbps Full Speed USB v1.0 | ||
usbus2: 12Mbps Full Speed USB v1.0 | usbus2: 12Mbps Full Speed USB v1.0 | ||
− | usbus3: | + | usbus3: 12Mbps Full Speed USB v1.0 |
usbus4: 12Mbps Full Speed USB v1.0 | usbus4: 12Mbps Full Speed USB v1.0 | ||
− | usbus5 | + | usbus5: 480Mbps High Speed USB v2.0 |
− | + | ugen0.1: <ATI> at usbus0 | |
− | + | uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 | |
− | ugen0.1: < | + | ugen1.1: <ATI> at usbus1 |
− | uhub0: < | + | uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 |
− | ugen1.1: < | + | ugen2.1: <ATI> at usbus2 |
− | uhub1: < | + | uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 |
− | ugen2.1: < | + | ugen3.1: <ATI> at usbus3 |
− | uhub2: < | + | uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 |
− | ugen3.1: < | + | ugen4.1: <ATI> at usbus4 |
− | uhub3: < | + | uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 |
− | ugen4.1: < | + | ugen5.1: <ATI> at usbus5 |
− | uhub4: < | + | uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 |
− | ugen5.1: < | + | ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 |
− | uhub5: < | + | ada0: <ST3750330NS MA08> ATA-8 SATA 2.x device |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | ada0 at ahcich0 bus 0 | ||
− | ada0: < | ||
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ||
ada0: Command Queueing enabled | ada0: Command Queueing enabled | ||
− | ada0: | + | ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) |
− | ada0: Previously was known as | + | ada0: Previously was known as ad4 |
− | ada1 at ahcich1 bus 0 | + | ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 |
− | ada1: < | + | ada1: <ST3750330NS MA08> ATA-8 SATA 2.x device |
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ||
ada1: Command Queueing enabled | ada1: Command Queueing enabled | ||
− | ada1: | + | ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) |
− | ada1: Previously was known as | + | ada1: Previously was known as ad6 |
− | ada2 at ahcich2 bus 0 | + | ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 |
− | ada2: < | + | ada2: <ST3750330NS MA08> ATA-8 SATA 2.x device |
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ||
ada2: Command Queueing enabled | ada2: Command Queueing enabled | ||
− | ada2: | + | ada2: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) |
− | ada2: Previously was known as | + | ada2: Previously was known as ad8 |
− | ada3 at ahcich3 bus 0 | + | ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 |
− | ada3: < | + | ada3: <ST3750330NS MA08> ATA-8 SATA 2.x device |
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ||
ada3: Command Queueing enabled | ada3: Command Queueing enabled | ||
− | ada3: | + | ada3: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C) |
− | ada3: Previously was known as | + | ada3: Previously was known as ad10 |
− | ada4 at | + | ada4 at ata0 bus 0 scbus4 target 0 lun 0 |
− | ada4: < | + | ada4: <SAMSUNG HD300LD WK100-12> ATA-7 device |
− | + | ada4: 100.000MB/s transfers (UDMA5, PIO 8192bytes) | |
− | ada4: | + | ada4: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C) |
− | ada4: | + | ada4: Previously was known as ad0 |
− | + | Timecounter "TSC" frequency 2394319689 Hz quality 800 | |
− | ada4: Previously was known as | + | uhub0: 2 ports with 2 removable, self powered |
− | + | uhub1: 2 ports with 2 removable, self powered | |
− | + | uhub2: 2 ports with 2 removable, self powered | |
− | + | uhub3: 2 ports with 2 removable, self powered | |
− | + | uhub4: 2 ports with 2 removable, self powered | |
− | + | Root mount waiting for: usbus5 | |
− | + | Root mount waiting for: usbus5 | |
− | + | Root mount waiting for: usbus5 | |
− | + | Root mount waiting for: usbus5 | |
− | + | uhub5: 10 ports with 10 removable, self powered | |
− | + | Trying to mount root from ufs:/dev/ada4s1a [rw]... | |
− | + | WARNING: / was not properly dismounted | |
− | + | ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present; | |
− | + | to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf. | |
− | + | ZFS filesystem version 5 | |
− | + | ZFS storage pool version 28 | |
+ | WARNING: /data was not properly dismounted | ||
+ | WARNING: /data: GJOURNAL flag on fs but no gjournal provider below | ||
+ | re0: link state changed to UP | ||
</pre> | </pre> |