Geschichte/Server/higgs/dmesg: Unterschied zwischen den Versionen

Aus UUGRN
< Geschichte‎ | Server‎ | higgs
(Übernommen von strange2, muss aktualisiert werden, sobald 9.1 und die neuen Platten laufen)
 
(9.1 auf neuem mainboard)
Zeile 5: Zeile 5:
 
Copyright (c) 1992-2012 The FreeBSD Project.
 
Copyright (c) 1992-2012 The FreeBSD Project.
 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
+
        The Regents of the University of California. All rights reserved.
 
FreeBSD is a registered trademark of The FreeBSD Foundation.
 
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
+
FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012
 
     root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
 
     root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: AMD Athlon(tm) 64 Processor 3800+ (2394.32-MHz K8-class CPU)
+
CPU: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz (2400.14-MHz K8-class CPU)
   Origin = "AuthenticAMD"  Id = 0x50ff2 Family = f Model = 5f Stepping = 2
+
   Origin = "GenuineIntel"  Id = 0x6f6 Family = 6 Model = f Stepping = 6
   Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
+
   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0x2001<SSE3,CX16>
+
   Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
+
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8>
+
   AMD Features2=0x1<LAHF>
real memory  = 4294967296 (4096 MB)
+
  TSC: P-state invariant, performance statistics
avail memory = 4069847040 (3881 MB)
+
real memory  = 8589934592 (8192 MB)
 +
avail memory = 8165134336 (7786 MB)
 
Event timer "LAPIC" quality 400
 
Event timer "LAPIC" quality 400
ACPI APIC Table: <022808 APIC1145>
+
ACPI APIC Table: <INTEL  DP35DP  >
ioapic0 <Version 2.1> irqs 0-23 on motherboard
+
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 +
FreeBSD/SMP: 1 package(s) x 2 core(s)
 +
cpu0 (BSP): APIC ID:  0
 +
cpu1 (AP): APIC ID:  1
 +
ioapic0: Changing APIC ID to 2
 +
ioapic0 <Version 2.0> irqs 0-23 on motherboard
 
kbd1 at kbdmux0
 
kbd1 at kbdmux0
acpi0: <CTL COMPUTER> on motherboard
+
acpi0: <INTEL DP35DP> on motherboard
 
acpi0: Power Button (fixed)
 
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
 
acpi0: reservation of ffb80000, 80000 (3) failed
 
acpi0: reservation of fff80000, 80000 (3) failed
 
acpi0: reservation of 0, a0000 (3) failed
 
acpi0: reservation of 100000, ddf00000 (3) failed
 
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
 
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 
 
cpu0: <ACPI CPU> on acpi0
 
cpu0: <ACPI CPU> on acpi0
 +
cpu1: <ACPI CPU> on acpi0
 +
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
 +
Event timer "RTC" frequency 32768 Hz quality 0
 +
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
 +
Timecounter "i8254" frequency 1193182 Hz quality 0
 +
Event timer "i8254" frequency 1193182 Hz quality 100
 +
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
 +
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
 +
acpi_button0: <Sleep Button> on acpi0
 
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 
pci0: <ACPI PCI bus> on pcib0
 
pci0: <ACPI PCI bus> on pcib0
 
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
 
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
 
pci1: <ACPI PCI bus> on pcib1
 
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xfc000000-0xfdffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
+
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
+
pci0: <simple comms> at device 3.0 (no driver attached)
 +
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x3400-0x341f mem 0xe3100000-0xe311ffff,0xe3120000-0xe3120fff irq 20 at device 25.0 on pci0
 +
em0: Using an MSI interrupt
 +
em0: Ethernet address: 00:1c:c0:60:f2:9a
 +
uhci0: <Intel 82801I (ICH9) USB controller> port 0x30e0-0x30ff irq 18 at device 26.0 on pci0
 +
uhci0: LegSup = 0x2f00
 +
usbus0 on uhci0
 +
uhci1: <Intel 82801I (ICH9) USB controller> port 0x30c0-0x30df irq 21 at device 26.1 on pci0
 +
uhci1: LegSup = 0x2f00
 +
usbus1 on uhci1
 +
uhci2: <Intel 82801I (ICH9) USB controller> port 0x30a0-0x30bf irq 17 at device 26.2 on pci0
 +
uhci2: LegSup = 0x2f00
 +
usbus2 on uhci2
 +
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe3121c00-0xe3121fff irq 17 at device 26.7 on pci0
 +
usbus3: EHCI version 1.0
 +
usbus3 on ehci0
 +
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
 
pci2: <ACPI PCI bus> on pcib2
 
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 810xE PCIe 10/100baseTX> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2
+
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
re0: Using 1 MSI message
+
pci3: <ACPI PCI bus> on pcib3
re0: Chip rev. 0x34000000
+
atapci0: <Marvell 88SE6101 UDMA133 controller> port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0xe3000000-0xe30001ff irq 17 at device 0.0 on pci3
re0: MAC rev. 0x00000000
+
ata2: <ATA channel> at channel 0 on atapci0
miibus0: <MII bus> on re0
+
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
+
pci4: <ACPI PCI bus> on pcib4
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
+
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
re0: Ethernet address: 00:19:db:68:58:88
+
pci5: <ACPI PCI bus> on pcib5
ahci0: <ATI IXP600 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 18.0 on pci0
+
pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
+
pci6: <ACPI PCI bus> on pcib6
 +
uhci3: <Intel 82801I (ICH9) USB controller> port 0x3080-0x309f irq 23 at device 29.0 on pci0
 +
uhci3: LegSup = 0x2f00
 +
usbus4 on uhci3
 +
uhci4: <Intel 82801I (ICH9) USB controller> port 0x3060-0x307f irq 19 at device 29.1 on pci0
 +
uhci4: LegSup = 0x2f00
 +
usbus5 on uhci4
 +
uhci5: <Intel 82801I (ICH9) USB controller> port 0x3040-0x305f irq 18 at device 29.2 on pci0
 +
uhci5: LegSup = 0x2f00
 +
usbus6 on uhci5
 +
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe3121800-0xe3121bff irq 23 at device 29.7 on pci0
 +
usbus7: EHCI version 1.0
 +
usbus7 on ehci1
 +
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 +
pci7: <ACPI PCI bus> on pcib7
 +
isab0: <PCI-ISA bridge> at device 31.0 on pci0
 +
isa0: <ISA bus> on isab0
 +
ahci0: <Intel ICH9 AHCI SATA controller> port 0x3428-0x342f,0x3434-0x3437,0x3420-0x3427,0x3430-0x3433,0x3020-0x303f mem 0xe3121000-0xe31217ff irq 21 at device 31.2 on pci0
 +
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
 
ahcich0: <AHCI channel> at channel 0 on ahci0
 
ahcich0: <AHCI channel> at channel 0 on ahci0
 
ahcich1: <AHCI channel> at channel 1 on ahci0
 
ahcich1: <AHCI channel> at channel 1 on ahci0
 
ahcich2: <AHCI channel> at channel 2 on ahci0
 
ahcich2: <AHCI channel> at channel 2 on ahci0
 
ahcich3: <AHCI channel> at channel 3 on ahci0
 
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 19.0 on pci0
+
ahcich4: <AHCI channel> at channel 4 on ahci0
usbus0: <OHCI (generic) USB controller> on ohci0
+
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 17 at device 19.1 on pci0
+
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
usbus1: <OHCI (generic) USB controller> on ohci1
+
orm0: <ISA Option ROMs> at iomem 0xd0800-0xd17ff,0xd1800-0xd27ff on isa0
ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.2 on pci0
+
sc0: <System console> at flags 0x100 on isa0
usbus2: <OHCI (generic) USB controller> on ohci2
+
sc0: VGA <16 virtual consoles, flags=0x300>
ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 17 at device 19.3 on pci0
+
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
usbus3: <OHCI (generic) USB controller> on ohci3
+
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at device 19.4 on pci0
 
usbus4: <OHCI (generic) USB controller> on ohci4
 
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 19 at device 19.5 on pci0
 
ehci0: AMD SB600/700 quirk applied
 
usbus5: EHCI version 1.0
 
usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
 
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
 
atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
 
ata0: <ATA channel 0> on atapci0
 
isab0: <PCI-ISA bridge> at device 20.3 on pci0
 
isa0: <ISA bus> on isab0
 
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
 
pci3: <ACPI PCI bus> on pcib3
 
re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 21 at device 3.0 on pci3
 
re1: Chip rev. 0x04000000
 
re1: MAC rev. 0x00000000
 
miibus1: <MII bus> on re1
 
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
 
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
 
re1: Ethernet address: 00:18:e7:16:48:56
 
acpi_button0: <Power Button> on acpi0
 
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
 
Timecounter "i8254" frequency 1193182 Hz quality 0
 
Event timer "i8254" frequency 1193182 Hz quality 100
 
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
 
Event timer "RTC" frequency 32768 Hz quality 0
 
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
 
Timecounter "HPET" frequency 14318180 Hz quality 950
 
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 
 
atkbd0: <AT Keyboard> irq 1 on atkbdc0
 
atkbd0: <AT Keyboard> irq 1 on atkbdc0
 
kbd0 at atkbd0
 
kbd0 at atkbd0
 
atkbd0: [GIANT-LOCKED]
 
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
 
sc0: <System console> at flags 0x100 on isa0
 
sc0: VGA <16 virtual consoles, flags=0x300>
 
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 
 
ppc0: cannot reserve I/O port range
 
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
+
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
acpi_throttle0: CLK_VAL field overlaps THT_EN bit
+
ctl: CAM Target Layer loaded
device_attach: acpi_throttle0 attach returned 6
+
est0: <Enhanced SpeedStep Frequency Control> on cpu0
powernow0: <PowerNow! K8> on cpu0
+
p4tcc0: <CPU Frequency Thermal Control> on cpu0
device_attach: powernow0 attach returned 6
+
est1: <Enhanced SpeedStep Frequency Control> on cpu1
 +
p4tcc1: <CPU Frequency Thermal Control> on cpu1
 +
ZFS filesystem version 5
 +
ZFS storage pool version 28
 
Timecounters tick every 1.000 msec
 
Timecounters tick every 1.000 msec
 
usbus0: 12Mbps Full Speed USB v1.0
 
usbus0: 12Mbps Full Speed USB v1.0
 
usbus1: 12Mbps Full Speed USB v1.0
 
usbus1: 12Mbps Full Speed USB v1.0
 
usbus2: 12Mbps Full Speed USB v1.0
 
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
+
usbus3: 480Mbps High Speed USB v2.0
 
usbus4: 12Mbps Full Speed USB v1.0
 
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
+
usbus5: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI> at usbus0
+
usbus6: 12Mbps Full Speed USB v1.0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
+
usbus7: 480Mbps High Speed USB v2.0
ugen1.1: <ATI> at usbus1
+
ugen0.1: <Intel> at usbus0
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
+
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen2.1: <ATI> at usbus2
+
ugen1.1: <Intel> at usbus1
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
+
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen3.1: <ATI> at usbus3
+
ugen2.1: <Intel> at usbus2
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
+
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen4.1: <ATI> at usbus4
+
ugen3.1: <Intel> at usbus3
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
+
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen5.1: <ATI> at usbus5
+
ugen4.1: <Intel> at usbus4
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
+
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
+
ugen5.1: <Intel> at usbus5
ada0: <ST3750330NS MA08> ATA-8 SATA 2.x device
+
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 +
ugen6.1: <Intel> at usbus6
 +
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
 +
ugen7.1: <Intel> at usbus7
 +
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
 +
uhub0: 2 ports with 2 removable, self powered
 +
uhub1: 2 ports with 2 removable, self powered
 +
uhub2: 2 ports with 2 removable, self powered
 +
uhub4: 2 ports with 2 removable, self powered
 +
uhub5: 2 ports with 2 removable, self powered
 +
uhub6: 2 ports with 2 removable, self powered
 +
uhub3: 6 ports with 6 removable, self powered
 +
uhub7: 6 ports with 6 removable, self powered
 +
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
 +
ada0: <ST3400620NS 3.AEG> ATA-7 SATA 2.x device
 
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
ada0: Command Queueing enabled
 
ada0: Command Queueing enabled
ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
+
ada0: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
+
ada0: Previously was known as ad6
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
+
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <ST3750330NS MA08> ATA-8 SATA 2.x device
+
ada1: <ST3400620NS 3.AEG> ATA-7 SATA 2.x device
 
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
ada1: Command Queueing enabled
 
ada1: Command Queueing enabled
ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
+
ada1: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
+
ada1: Previously was known as ad8
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
+
ada2 at ahcich2 bus 0 scbus3 target 0 lun 0
ada2: <ST3750330NS MA08> ATA-8 SATA 2.x device
+
ada2: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device
 
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
ada2: Command Queueing enabled
 
ada2: Command Queueing enabled
ada2: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
+
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
+
ada2: Previously was known as ad10
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
+
ada3 at ahcich3 bus 0 scbus4 target 0 lun 0
ada3: <ST3750330NS MA08> ATA-8 SATA 2.x device
+
ada3: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device
 
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
ada3: Command Queueing enabled
 
ada3: Command Queueing enabled
ada3: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
+
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
+
ada3: Previously was known as ad12
ada4 at ata0 bus 0 scbus4 target 0 lun 0
+
ada4 at ahcich4 bus 0 scbus5 target 0 lun 0
ada4: <SAMSUNG HD300LD WK100-12> ATA-7 device
+
ada4: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device
ada4: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
+
ugen2.2: <vendor 0x046a> at usbus2
ada4: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
+
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Previously was known as ad0
+
ada4: Command Queueing enabled
Timecounter "TSC" frequency 2394319689 Hz quality 800
+
ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
uhub0: 2 ports with 2 removable, self powered
+
ada4: Previously was known as ad14
uhub1: 2 ports with 2 removable, self powered
+
ada5 at ahcich5 bus 0 scbus6 target 0 lun 0
uhub2: 2 ports with 2 removable, self powered
+
ada5: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device
uhub3: 2 ports with 2 removable, self powered
+
ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
uhub4: 2 ports with 2 removable, self powered
+
ada5: Command Queueing enabled
Root mount waiting for: usbus5
+
ada5: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
Root mount waiting for: usbus5
+
ada5: Previously was known as ad16
Root mount waiting for: usbus5
+
cd0 at ata2 bus 0 scbus0 target 1 lun 0
Root mount waiting for: usbus5
+
cd0: <TEAC CD-224E-N 1.AA> Removable CD-ROM SCSI-0 device
uhub5: 10 ports with 10 removable, self powered
+
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
Trying to mount root from ufs:/dev/ada4s1a [rw]...
+
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
+
SMP: AP CPU #1 Launched!
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
+
Timecounter "TSC-low" frequency 9375531 Hz quality 1000
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
+
ukbd0: <vendor 0x046a product 0x0011, class 0/0, rev 2.00/1.00, addr 2> on usbus2
ZFS filesystem version 5
+
kbd2 at ukbd0
ZFS storage pool version 28
+
Trying to mount root from zfs:zroot/ROOT []...
WARNING: /data was not properly dismounted
 
WARNING: /data: GJOURNAL flag on fs but no gjournal provider below
 
re0: link state changed to UP
 
 
</pre>
 
</pre>

Version vom 20. April 2013, 22:02 Uhr

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r243825: Tue Dec  4 09:23:10 UTC 2012
    root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz (2400.14-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Family = 6  Model = f  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8165134336 (7786 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL  DP35DP  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL DP35DP> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 on pci1
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x3400-0x341f mem 0xe3100000-0xe311ffff,0xe3120000-0xe3120fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:1c:c0:60:f2:9a
uhci0: <Intel 82801I (ICH9) USB controller> port 0x30e0-0x30ff irq 18 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x30c0-0x30df irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x30a0-0x30bf irq 17 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe3121c00-0xe3121fff irq 17 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <Marvell 88SE6101 UDMA133 controller> port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0xe3000000-0xe30001ff irq 17 at device 0.0 on pci3
ata2: <ATA channel> at channel 0 on atapci0
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci6: <ACPI PCI bus> on pcib6
uhci3: <Intel 82801I (ICH9) USB controller> port 0x3080-0x309f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x3060-0x307f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x3040-0x305f irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6 on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe3121800-0xe3121bff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0x3428-0x342f,0x3434-0x3437,0x3420-0x3427,0x3430-0x3433,0x3020-0x303f mem 0xe3121000-0xe31217ff irq 21 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
orm0: <ISA Option ROMs> at iomem 0xd0800-0xd17ff,0xd1800-0xd27ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <ST3400620NS 3.AEG> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad6
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <ST3400620NS 3.AEG> ATA-7 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad8
ada2 at ahcich2 bus 0 scbus3 target 0 lun 0
ada2: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad10
ada3 at ahcich3 bus 0 scbus4 target 0 lun 0
ada3: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad12
ada4 at ahcich4 bus 0 scbus5 target 0 lun 0
ada4: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device
ugen2.2: <vendor 0x046a> at usbus2
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada4: Previously was known as ad14
ada5 at ahcich5 bus 0 scbus6 target 0 lun 0
ada5: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device
ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada5: Previously was known as ad16
cd0 at ata2 bus 0 scbus0 target 1 lun 0
cd0: <TEAC CD-224E-N 1.AA> Removable CD-ROM SCSI-0 device 
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 9375531 Hz quality 1000
ukbd0: <vendor 0x046a product 0x0011, class 0/0, rev 2.00/1.00, addr 2> on usbus2
kbd2 at ukbd0
Trying to mount root from zfs:zroot/ROOT []...