Geschichte/Server/strange2/dmesg

Aus UUGRN
< Geschichte‎ | Server‎ | strange2(Weitergeleitet von UUGRN:Server/strange2/dmesg)
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:46:30 UTC 2012
    root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: AMD Athlon(tm) 64 Processor 3800+ (2394.32-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x50ff2  Family = f  Model = 5f  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8>
real memory  = 4294967296 (4096 MB)
avail memory = 4069847040 (3881 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <022808 APIC1145>
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <CTL COMPUTER> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fff80000, 80000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, ddf00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xfc000000-0xfdffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 810xE PCIe 10/100baseTX> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2
re0: Using 1 MSI message
re0: Chip rev. 0x34000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Ethernet address: 00:19:db:68:58:88
ahci0: <ATI IXP600 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 18.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 19.0 on pci0
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 17 at device 19.1 on pci0
usbus1: <OHCI (generic) USB controller> on ohci1
ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.2 on pci0
usbus2: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 17 at device 19.3 on pci0
usbus3: <OHCI (generic) USB controller> on ohci3
ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at device 19.4 on pci0
usbus4: <OHCI (generic) USB controller> on ohci4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 19 at device 19.5 on pci0
ehci0: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 21 at device 3.0 on pci3
re1: Chip rev. 0x04000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Ethernet address: 00:18:e7:16:48:56
acpi_button0: <Power Button> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: CLK_VAL field overlaps THT_EN bit
device_attach: acpi_throttle0 attach returned 6
powernow0: <PowerNow! K8> on cpu0
device_attach: powernow0 attach returned 6
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3750330NS MA08> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST3750330NS MA08> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <ST3750330NS MA08> ATA-8 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <ST3750330NS MA08> ATA-8 SATA 2.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
ada4 at ata0 bus 0 scbus4 target 0 lun 0
ada4: <SAMSUNG HD300LD WK100-12> ATA-7 device
ada4: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada4: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
ada4: Previously was known as ad0
Timecounter "TSC" frequency 2394319689 Hz quality 800
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
uhub5: 10 ports with 10 removable, self powered
Trying to mount root from ufs:/dev/ada4s1a [rw]...
WARNING: / was not properly dismounted
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
WARNING: /data was not properly dismounted
WARNING: /data: GJOURNAL flag on fs but no gjournal provider below
re0: link state changed to UP