Bearbeiten von „RoaringBox/Konfiguration“

'''RoaringBox''' verwendet folgende Konfigurationen:

== Gemeinsam ==
=== /etc/mini-httpd.conf ===
<pre>
# Example config for mini_httpd.
# Author: Marvin Stark <marv@der-marv.de>

# Uncomment this line for turning on ssl support.
#ssl

# On which host mini_httpd should bind?
#host=localhost

# On which port mini_httpd should listen?
port=80

# Which user mini_httpd should use?
user=romie

# Run in chroot mode?
#chroot # yes
nochroot # no

# Working directory of mini_httpd.
#dir=<work_dir>

# We are the web files stored?
data_dir=/var/lib/romie/htdocs

# Which certificate to use?
#certfile=<certfile>

# Which logfile to use?
#logfile=/var/log/mini-httpd.log

# Which pidfile to use?
pidfile=/var/run/mini-httpd.pid

# Which charset to use?
charset=iso-8859-1

# CGI Pattern
cgipat=**.cgi
</pre>

=== /etc/default/roaraudio ===
<pre>
#RoarAudio Configuration

# --- [ General Options ]---

# Start roard? YES or NO:
ROARD='YES'

# Additionl Options to pass to roard, should normally be empty
ROARD_OPTS='--new-sock -u -b /tmp/roar'

# Should we run roard in realtime mode:
# NO     - Don't run in realtime mode
# YES    - Run in realtime mode
# DOUBLE - Try to run in a 'very realtime mode'
ROARD_REALTIME='YES'

# PIDFile for roard:
# Default is enabled at /var/run/roard.pid
# Set to empty string to disable.
PIDFILE='/var/run/roard.pid'

# Location of roard:
# This is a human readable location of the roard used
# for Zero Conf locating of a RoarAudio server on the
# Network. To use Zero Conf enable SLP (see below).
#ROARD_LOCATION=''

# Default location for roard:
# Set this to a remote address and disable local roard
# to run a network only setup.
# ROARAUDIO_DEFAULT_SOCKET='server.local'

# --- [ Network ] ---

# Listening socket's address family:
# UNIX   - Local connections only
# TCP    - Connections via TCP/IP
# DECnet - Connections via DECnet
ROARD_AF='TCP'

# Socket to listen on (UNIX):
#ROARD_SOCKET='/tmp/roar'

# Port to listen on (TCP):
# ROARD_PORT=16002

# Host/Nodename to listen on (TCP, DECnet):
# use a value of '0.0.0.0' to listen publicly for TCP.
ROARD_HOST='0.0.0.0'

# Object to listen on (DECnet):
# ROARD_OBJECT='roar'

# Annouce us via OpenSLP:
# Set to YES or NO.
# In case of YES roarclients can autolocat this server
# on the network.
ROARD_SLP='NO'

# --- [ EsounD Emulation ] ---

# Listen socket for server side EsounD emulation::
# NONE   - Disable EsounD emulation
# UNIX   - Local connections only
# TCP    - Connections via TCP/IP
ROARD_EMUL_ESD_AF='TCP'

# --- [ Audio and Devices ] ---

# Samplerate, number of channels and bits per sample:
# ROARD_RATE=44100
# ROARD_CHANNELS=2
# ROARD_BITS=16

# Sound Driver and Device:
# To get a list run: roard --list-driver
# Don't forget to include 'sync' in the options unless
# you REALLY, REALLY know what you are doing
# ROARD_DRIVER='oss'
# ROARD_DEVICE='/dev/dsp'
# ROARD_DRIVER_OPTIONS='sync'

# --- [ Permitions ] ---

# User and Group to run roard with:
# Note: Users in the same group my access roard
#       if runnung in UNIX mode.
ROARD_USER='roard'
ROARD_GROUP='audio'

# --- [ Security ] ---

# Directory to chroot to:
# Use empty value to disable.
# Directory may/should be completly empty.
ROARD_CHROOT='/var/empty'

#ll
</pre>

=== /etc/default/rpld ===
<pre>
#RoarAudio PlayList Daemon (RPLD) Configuration

# --- [ General Options ]---

# Start rpld? YES or NO:
RPLD='YES'

# Additionl Options to pass to rpld, should normally be empty
RPLD_OPTS=''

# PIDFile for rpld:
# Default is enabled at /var/run/rpld.pid
# Set to empty string to disable.
# PIDFILE='/var/run/rpld.pid'

# Server address of roard:
# Default: libroar buildin server list.
# ROARAUDIO_SERVER='server.local'

# --- [ Network ] ---

# Listening socket's address family:
# UNIX   - Local connections only
# TCP    - Connections via TCP/IP
RPLD_AF='TCP'

# Socket to listen on (UNIX):
#RPLD_SOCKET='/tmp/.rpld'

# Port to listen on (TCP):
# RPLD_PORT=24148

# Host/Nodename to listen on (TCP):
# use a value of '0.0.0.0' to listen publicly for TCP.
RPLD_HOST='0.0.0.0'

# --- [ Storing and Restoring ]---

# Where to store to?:
RPLD_STORE_LOCATION='/var/lib/roarplaylistd/'

# ReStore on startup:
RPLD_RESTORE='true'

# Store on exit:
RPLD_STORE='true'

# --- [ Permitions ] ---

# User to run rpld as:
RPLD_USER='roard'

# User and Group to set on socket:
# Note: Users in the same group my access rpld
# RPLD_SOCK_USER='roard'
# RPLD_SOCK_GROUP='audio'

#ll
</pre>

=== /etc/ld.so.conf.d/roaraudio.conf ===
<pre>
/usr/local/lib/
</pre>

=== /etc/romie.conf ===

== RoaringBox 128/* ==
=== /etc/default/mini-httpd ===
<pre>
# Defaults for mini_httpd initscript
# Author: Marvin Stark <marv@der-marv.de>

# Start daemon?
START=0

# Additional options that are passed to the Daemon.
DAEMON_OPTS="-C /etc/mini-httpd.conf"
</pre>

== RoaringBox 512/* ==
=== /etc/default/mini-httpd ===
<pre>
# Defaults for mini_httpd initscript
# Author: Marvin Stark <marv@der-marv.de>

# Start daemon?
# 0 = no
# 1 = yes
START=1

# Additional options that are passed to the Daemon.
DAEMON_OPTS="-C /etc/mini-httpd.conf"
</pre>

== Siehe Auch ==
* [[RoaringBox]]


[[Kategorie:RoarAudio]]
[[Kategorie:Software]]
[[Kategorie:Sound]]
{{Stub}}
@@ Zeile 173: / Zeile 173: @@
 # UNIX   - Local connections only
 # TCP    - Connections via TCP/IP
-# DECnet - Connections via DECnet
 RPLD_AF='TCP'
@@ Zeile 196: / Zeile 195: @@
 # Store on exit:
 RPLD_STORE='true'
-# --- [ Playback ] ---
-# Should we start up in playing state?
-RPLD_PLAY='true'
 # --- [ Permitions ] ---
-# User/Group to run rpld as:
+# User to run rpld as:
 RPLD_USER='roard'
-#RPLD_GROUP='audio'
 # User and Group to set on socket:
@@ Zeile 222: / Zeile 215: @@
 === /etc/romie.conf ===
-<pre>
-#romie.conf:
-# ---[ Network ]---
-# Address of RPLD Socket:
-# Default: /tmp/.rpld
-rpld.sockaddr = localhost
-# ---[ Style ]---
-# Default style:
-# Default: default
-template.vars.style = blue
-#ll
-</pre>
-=== /etc/libao.conf ===
-<pre>
-default_driver=roar
-</pre>
-=== /etc/inittab ===
-<pre>
-# /etc/inittab: init(8) configuration.
-# $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
-# The default runlevel.
-id:2:initdefault:
-# Boot-time system configuration/initialization script.
-# This is run first except when booting in emergency (-b) mode.
-si::sysinit:/etc/init.d/rcS
-# What to do in single-user mode.
-~~:S:wait:/sbin/sulogin
-# /etc/init.d executes the S and K scripts upon change
-# of runlevel.
-#
-# Runlevel 0 is halt.
-# Runlevel 1 is single-user.
-# Runlevels 2-5 are multi-user.
-# Runlevel 6 is reboot.
-l0:0:wait:/etc/init.d/rc 0
-l1:1:wait:/etc/init.d/rc 1
-l2:2:wait:/etc/init.d/rc 2
-l3:3:wait:/etc/init.d/rc 3
-l4:4:wait:/etc/init.d/rc 4
-l5:5:wait:/etc/init.d/rc 5
-l6:6:wait:/etc/init.d/rc 6
-# Normally not reached, but fallthrough in case of emergency.
-z6:6:respawn:/sbin/sulogin
-# What to do when CTRL-ALT-DEL is pressed.
-ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
-# Action on special keypress (ALT-UpArrow).
-#kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."
-# What to do when the power fails/returns.
-pf::powerwait:/etc/init.d/powerfail start
-pn::powerfailnow:/etc/init.d/powerfail now
-po::powerokwait:/etc/init.d/powerfail stop
-# /sbin/getty invocations for the runlevels.
-#
-# The "id" field MUST be the same as the last
-# characters of the device (after "tty").
-#
-# Format:
-#  <id>:<runlevels>:<action>:<process>
-#
-# Note that on most Debian systems tty7 is used by the X Window System,
-# so if you want to add more getty's go ahead but skip tty7 if you run X.
-#
-:2345:respawn:/sbin/getty 38400 tty1
-:23:respawn:/sbin/getty 38400 tty2
-:23:respawn:/sbin/getty 38400 tty3
-#4:23:respawn:/sbin/getty 38400 tty4
-#5:23:respawn:/sbin/getty 38400 tty5
-#6:23:respawn:/sbin/getty 38400 tty6
-# Example how to put a getty on a serial line (for a terminal)
-#
-#T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
-#T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
-# Example how to put a getty on a modem line.
-#
-#T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
-</pre>
 == RoaringBox 128/* ==
@@ Zeile 342: / Zeile 242: @@
 # Additional options that are passed to the Daemon.
 DAEMON_OPTS="-C /etc/mini-httpd.conf"
-</pre>
-=== /etc/inetd.conf ===
-<pre>
-# /etc/inetd.conf:  see inetd(8) for further informations.
-#
-# Internet superserver configuration database
-#
-#
-# Lines starting with "#:LABEL:" or "#<off>#" should not
-# be changed unless you know what you are doing!
-#
-# If you want to disable an entry so it isn't touched during
-# package updates just comment it out with a single '#' character.
-#
-# Packages should modify this file by using update-inetd(8)
-#
-# <service_name> <sock_type> <proto> <flags> <user> <server_path> <args>
-#
-#:INTERNAL: Internal services
-#discard        stream  tcp     nowait  root    internal
-#discard        dgram   udp     wait    root    internal
-#daytime        stream  tcp     nowait  root    internal
-#time     stream        tcp     nowait  root    internal
-#:STANDARD: These are standard services.
-#:BSD: Shell, login, exec and talk are BSD protocols.
-#:MAIL: Mail, news and uucp services.
-#:INFO: Info services
-#:BOOT: TFTP service is provided primarily for booting.  Most sites
-#       run this only on machines acting as "boot servers."
-#:RPC: RPC based services
-#:HAM-RADIO: amateur-radio services
-#:OTHER: Other services
-stream tcp nowait roard /usr/bin/roarmonhttp roarmonhttp --inetd
 </pre>