Bearbeiten von „Geschichte/Server/strange2/dmesg“

Aus UUGRN

Warnung: Du bist nicht angemeldet. Deine IP-Adresse wird bei Bearbeitungen öffentlich sichtbar. Melde dich an oder erstelle ein Benutzerkonto, damit Bearbeitungen deinem Benutzernamen zugeordnet werden.

Die Bearbeitung kann rückgängig gemacht werden. Bitte prüfe den Vergleich unten, um sicherzustellen, dass du dies tun möchtest, und speichere dann unten deine Änderungen, um die Bearbeitung rückgängig zu machen.

Aktuelle Version Dein Text
Zeile 1: Zeile 1:
−
<!-- updaten mit vim:
 
−
:r !ssh strange.uugrn.org cat /var/run/dmesg.boot
 
−
-->
 
 
<pre>
 
<pre>
−
Copyright (c) 1992-2012 The FreeBSD Project.
+
Copyright (c) 1992-2011 The FreeBSD Project.
 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
−
The Regents of the University of California. All rights reserved.
+
        The Regents of the University of California. All rights reserved.
 
FreeBSD is a registered trademark of The FreeBSD Foundation.
 
FreeBSD is a registered trademark of The FreeBSD Foundation.
−
FreeBSD 9.0-RELEASE #0: Tue Jan  3 07:46:30 UTC 2012
+
FreeBSD 8.2-RELEASE-p2 #0: Wed Jul 13 20:40:42 CEST 2011
−
     root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
+
     root@strange.uugrn.org:/usr/obj/usr/src/sys/GENERIC amd64
−
CPU: AMD Athlon(tm) 64 Processor 3800+ (2394.32-MHz K8-class CPU)
+
Timecounter "i8254" frequency 1193182 Hz quality 0
 +
CPU: AMD Athlon(tm) 64 Processor 3800+ (2394.29-MHz K8-class CPU)
 
   Origin = "AuthenticAMD"  Id = 0x50ff2  Family = f  Model = 5f  Stepping = 2
 
   Origin = "AuthenticAMD"  Id = 0x50ff2  Family = f  Model = 5f  Stepping = 2
 
   Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
 
   Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Zeile 15: Zeile 13:
 
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
 
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
 
   AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8>
 
   AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8>
−
real memory  = 4294967296 (4096 MB)
+
real memory  = 1610612736 (1536 MB)
−
avail memory = 4069847040 (3881 MB)
+
avail memory = 1471311872 (1403 MB)
−
Event timer "LAPIC" quality 400
 
 
ACPI APIC Table: <022808 APIC1145>
 
ACPI APIC Table: <022808 APIC1145>
 
ioapic0 <Version 2.1> irqs 0-23 on motherboard
 
ioapic0 <Version 2.1> irqs 0-23 on motherboard
 
kbd1 at kbdmux0
 
kbd1 at kbdmux0
 
acpi0: <CTL COMPUTER> on motherboard
 
acpi0: <CTL COMPUTER> on motherboard
 +
acpi0: [ITHREAD]
 
acpi0: Power Button (fixed)
 
acpi0: Power Button (fixed)
 
acpi0: reservation of fee00000, 1000 (3) failed
 
acpi0: reservation of fee00000, 1000 (3) failed
Zeile 27: Zeile 25:
 
acpi0: reservation of fff80000, 80000 (3) failed
 
acpi0: reservation of fff80000, 80000 (3) failed
 
acpi0: reservation of 0, a0000 (3) failed
 
acpi0: reservation of 0, a0000 (3) failed
−
acpi0: reservation of 100000, ddf00000 (3) failed
+
acpi0: reservation of 100000, 5bf00000 (3) failed
−
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
+
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
 
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 
cpu0: <ACPI CPU> on acpi0
 
cpu0: <ACPI CPU> on acpi0
 +
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
 +
Timecounter "HPET" frequency 14318180 Hz quality 900
 
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 
pci0: <ACPI PCI bus> on pcib0
 
pci0: <ACPI PCI bus> on pcib0
 
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
 
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
 
pci1: <ACPI PCI bus> on pcib1
 
pci1: <ACPI PCI bus> on pcib1
−
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xfc000000-0xfdffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
+
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0xf8000000-0xfbffffff,0xfeaf0000-0xfeafffff,0xfe900000-0xfe9fffff irq 18 at device 5.0 on pci1
 
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
 
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
 
pci2: <ACPI PCI bus> on pcib2
 
pci2: <ACPI PCI bus> on pcib2
−
re0: <RealTek 810xE PCIe 10/100baseTX> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2
+
re0: <RealTek 8101E/8102E/8102EL/8103E PCIe 10/100baseTX> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 19 at device 0.0 on pci2
−
re0: Using 1 MSI message
+
re0: Using 1 MSI messages
 
re0: Chip rev. 0x34000000
 
re0: Chip rev. 0x34000000
 
re0: MAC rev. 0x00000000
 
re0: MAC rev. 0x00000000
 
miibus0: <MII bus> on re0
 
miibus0: <MII bus> on re0
 
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
 
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
−
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
+
rlphy0:  10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, auto, auto-flow
 
re0: Ethernet address: 00:19:db:68:58:88
 
re0: Ethernet address: 00:19:db:68:58:88
−
ahci0: <ATI IXP600 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 18.0 on pci0
+
re0: [FILTER]
−
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
+
atapci0: <ATI IXP600 SATA300 controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfe8ff800-0xfe8ffbff irq 22 at device 18.0 on pci0
−
ahcich0: <AHCI channel> at channel 0 on ahci0
+
atapci0: [ITHREAD]
−
ahcich1: <AHCI channel> at channel 1 on ahci0
+
atapci0: AHCI v1.10 controller with 4 3Gbps ports, PM supported
−
ahcich2: <AHCI channel> at channel 2 on ahci0
+
ata2: <ATA channel 0> on atapci0
−
ahcich3: <AHCI channel> at channel 3 on ahci0
+
ata2: port is not ready (timeout 0ms) tfd = 000001d0
−
ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 19.0 on pci0
+
ata2: software reset clear timeout
 +
ata2: [ITHREAD]
 +
ata3: <ATA channel 1> on atapci0
 +
ata3: port is not ready (timeout 0ms) tfd = 000001d0
 +
ata3: software reset clear timeout
 +
ata3: [ITHREAD]
 +
ata4: <ATA channel 2> on atapci0
 +
ata4: port is not ready (timeout 0ms) tfd = 000001d0
 +
ata4: software reset clear timeout
 +
ata4: [ITHREAD]
 +
ata5: <ATA channel 3> on atapci0
 +
ata5: port is not ready (timeout 0ms) tfd = 000001d0
 +
ata5: software reset clear timeout
 +
ata5: [ITHREAD]
 +
ohci0: <OHCI (generic) USB controller> mem 0xfe8fe000-0xfe8fefff irq 16 at device 19.0 on pci0
 +
ohci0: [ITHREAD]
 
usbus0: <OHCI (generic) USB controller> on ohci0
 
usbus0: <OHCI (generic) USB controller> on ohci0
−
ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 17 at device 19.1 on pci0
+
ohci1: <OHCI (generic) USB controller> mem 0xfe8fd000-0xfe8fdfff irq 17 at device 19.1 on pci0
 +
ohci1: [ITHREAD]
 
usbus1: <OHCI (generic) USB controller> on ohci1
 
usbus1: <OHCI (generic) USB controller> on ohci1
−
ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.2 on pci0
+
ohci2: <OHCI (generic) USB controller> mem 0xfe8fc000-0xfe8fcfff irq 18 at device 19.2 on pci0
 +
ohci2: [ITHREAD]
 
usbus2: <OHCI (generic) USB controller> on ohci2
 
usbus2: <OHCI (generic) USB controller> on ohci2
−
ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 17 at device 19.3 on pci0
+
ohci3: <OHCI (generic) USB controller> mem 0xfe8fb000-0xfe8fbfff irq 17 at device 19.3 on pci0
 +
ohci3: [ITHREAD]
 
usbus3: <OHCI (generic) USB controller> on ohci3
 
usbus3: <OHCI (generic) USB controller> on ohci3
−
ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at device 19.4 on pci0
+
ohci4: <OHCI (generic) USB controller> mem 0xfe8fa000-0xfe8fafff irq 18 at device 19.4 on pci0
 +
ohci4: [ITHREAD]
 
usbus4: <OHCI (generic) USB controller> on ohci4
 
usbus4: <OHCI (generic) USB controller> on ohci4
−
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 19 at device 19.5 on pci0
+
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff000-0xfe8ff0ff irq 19 at device 19.5 on pci0
 +
ehci0: [ITHREAD]
 
ehci0: AMD SB600/700 quirk applied
 
ehci0: AMD SB600/700 quirk applied
 
usbus5: EHCI version 1.0
 
usbus5: EHCI version 1.0
 
usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
 
usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
 
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
 
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
−
atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
+
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
−
ata0: <ATA channel 0> on atapci0
+
ata0: <ATA channel 0> on atapci1
 +
ata0: [ITHREAD]
 +
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
 
isab0: <PCI-ISA bridge> at device 20.3 on pci0
 
isab0: <PCI-ISA bridge> at device 20.3 on pci0
 
isa0: <ISA bus> on isab0
 
isa0: <ISA bus> on isab0
 
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
 
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
 
pci3: <ACPI PCI bus> on pcib3
 
pci3: <ACPI PCI bus> on pcib3
−
re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 21 at device 3.0 on pci3
 
−
re1: Chip rev. 0x04000000
 
−
re1: MAC rev. 0x00000000
 
−
miibus1: <MII bus> on re1
 
−
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
 
−
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
 
−
re1: Ethernet address: 00:18:e7:16:48:56
 
 
acpi_button0: <Power Button> on acpi0
 
acpi_button0: <Power Button> on acpi0
−
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
 
−
Timecounter "i8254" frequency 1193182 Hz quality 0
 
−
Event timer "i8254" frequency 1193182 Hz quality 100
 
 
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
 
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
−
Event timer "RTC" frequency 32768 Hz quality 0
+
acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
−
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
+
device_attach: acpi_hpet1 attach returned 12
−
Timecounter "HPET" frequency 14318180 Hz quality 950
 
 
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 
atkbd0: <AT Keyboard> irq 1 on atkbdc0
 
atkbd0: <AT Keyboard> irq 1 on atkbdc0
 
kbd0 at atkbd0
 
kbd0 at atkbd0
 
atkbd0: [GIANT-LOCKED]
 
atkbd0: [GIANT-LOCKED]
 +
atkbd0: [ITHREAD]
 +
psm0: <PS/2 Mouse> irq 12 on atkbdc0
 +
psm0: [GIANT-LOCKED]
 +
psm0: [ITHREAD]
 +
psm0: model IntelliMouse, device ID 3
 
orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
 
orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
 
sc0: <System console> at flags 0x100 on isa0
 
sc0: <System console> at flags 0x100 on isa0
Zeile 102: Zeile 118:
 
powernow0: <PowerNow! K8> on cpu0
 
powernow0: <PowerNow! K8> on cpu0
 
device_attach: powernow0 attach returned 6
 
device_attach: powernow0 attach returned 6
 +
Timecounter "TSC" frequency 2394287984 Hz quality 800
 
Timecounters tick every 1.000 msec
 
Timecounters tick every 1.000 msec
 
usbus0: 12Mbps Full Speed USB v1.0
 
usbus0: 12Mbps Full Speed USB v1.0
Zeile 109: Zeile 126:
 
usbus4: 12Mbps Full Speed USB v1.0
 
usbus4: 12Mbps Full Speed USB v1.0
 
usbus5: 480Mbps High Speed USB v2.0
 
usbus5: 480Mbps High Speed USB v2.0
 +
ad0: 476940MB <Seagate ST3500841A 3.AAJ> at ata0-master UDMA100
 
ugen0.1: <ATI> at usbus0
 
ugen0.1: <ATI> at usbus0
 
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Zeile 121: Zeile 139:
 
ugen5.1: <ATI> at usbus5
 
ugen5.1: <ATI> at usbus5
 
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
 
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
−
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
+
ad4: 715404MB <Seagate ST3750330NS MA08> at ata2-master UDMA100 SATA 3Gb/s
−
ada0: <ST3750330NS MA08> ATA-8 SATA 2.x device
+
ad6: 715404MB <Seagate ST3750330NS MA08> at ata3-master UDMA100 SATA 3Gb/s
−
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
+
ad8: 715404MB <Seagate ST3750330NS MA08> at ata4-master UDMA100 SATA 3Gb/s
−
ada0: Command Queueing enabled
+
ad10: 715404MB <Seagate ST3750330NS MA08> at ata5-master UDMA100 SATA 3Gb/s
−
ada0: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
 
−
ada0: Previously was known as ad4
 
−
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
 
−
ada1: <ST3750330NS MA08> ATA-8 SATA 2.x device
 
−
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
−
ada1: Command Queueing enabled
 
−
ada1: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
 
−
ada1: Previously was known as ad6
 
−
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
 
−
ada2: <ST3750330NS MA08> ATA-8 SATA 2.x device
 
−
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
−
ada2: Command Queueing enabled
 
−
ada2: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
 
−
ada2: Previously was known as ad8
 
−
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
 
−
ada3: <ST3750330NS MA08> ATA-8 SATA 2.x device
 
−
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 
−
ada3: Command Queueing enabled
 
−
ada3: 715404MB (1465149168 512 byte sectors: 16H 63S/T 16383C)
 
−
ada3: Previously was known as ad10
 
−
ada4 at ata0 bus 0 scbus4 target 0 lun 0
 
−
ada4: <SAMSUNG HD300LD WK100-12> ATA-7 device
 
−
ada4: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
 
−
ada4: 286168MB (586072368 512 byte sectors: 16H 63S/T 16383C)
 
−
ada4: Previously was known as ad0
 
−
Timecounter "TSC" frequency 2394319689 Hz quality 800
 
 
uhub0: 2 ports with 2 removable, self powered
 
uhub0: 2 ports with 2 removable, self powered
 
uhub1: 2 ports with 2 removable, self powered
 
uhub1: 2 ports with 2 removable, self powered
Zeile 161: Zeile 153:
 
Root mount waiting for: usbus5
 
Root mount waiting for: usbus5
 
uhub5: 10 ports with 10 removable, self powered
 
uhub5: 10 ports with 10 removable, self powered
−
Trying to mount root from ufs:/dev/ada4s1a [rw]...
+
Trying to mount root from ufs:/dev/ad0s1a
−
WARNING: / was not properly dismounted
 
 
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
 
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
 
             to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
 
             to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
 
ZFS filesystem version 5
 
ZFS filesystem version 5
 
ZFS storage pool version 28
 
ZFS storage pool version 28
−
WARNING: /data was not properly dismounted
 
−
WARNING: /data: GJOURNAL flag on fs but no gjournal provider below
 
−
re0: link state changed to UP
 
 
</pre>
 
</pre>

Bitte kopiere keine Inhalte, die nicht Deine eigenen sind!

Du gibst uns hiermit Deine Zusage, dass
  • Du den Text nicht aus Wikipedia kopiert hast
  • Du den Text selbst verfasst hast
  • oder der Text entweder
    • Allgemeingut (public domain) ist
    • oder der Copyright-Inhaber seine Zustimmung gegeben hat.
Wichtig
  • Benutze keine urheberrechtlich geschützten Werke ohne Erlaubnis des Copyright-Inhabers!
  • Falls dieser Text bereits woanders veröffentlicht wurde, weise bitte auf der 'Diskussion:'-Seite darauf hin.
  • Bitte beachte, dass alle UUGRN-Beiträge automatisch unter der der Creative Commons Lizenz stehen.
  • Falls Du nicht möchtest, dass Deine Arbeit hier von anderen verändert und verbreitet wird, dann drücke nicht auf "Artikel Speichern".

Bitte beantworte die folgende Frage, um diese Seite speichern zu können (weitere Informationen):

Abbrechen Bearbeitungshilfe (wird in einem neuen Fenster geöffnet)
Abgerufen von „https://wiki.uugrn.org/Geschichte/Server/strange2/dmesg“