Geschichte/Server/higgs/dmesg: Unterschied zwischen den Versionen
Aus UUGRN
< Geschichte | Server | higgs
Rabe (Diskussion | Beiträge) (Übernommen von strange2, muss aktualisiert werden, sobald 9.1 und die neuen Platten laufen) |
Sdk (Diskussion | Beiträge) K (Sdk verschob die Seite UUGRN:Server/higgs/dmesg nach Geschichte/Server/higgs/dmesg) |
||
(Eine dazwischenliegende Version von einem anderen Benutzer wird nicht angezeigt) | |||
Zeile 5: | Zeile 5: | ||
Copyright (c) 1992-2012 The FreeBSD Project. | Copyright (c) 1992-2012 The FreeBSD Project. | ||
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 | ||
The Regents of the University of California. All rights reserved. | |||
FreeBSD is a registered trademark of The FreeBSD Foundation. | FreeBSD is a registered trademark of The FreeBSD Foundation. | ||
FreeBSD 9. | FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 | ||
root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 | root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 | ||
CPU: | CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2400.14-MHz K8-class CPU) | ||
Origin = " | Origin = "GenuineIntel" Id = 0x6f6 Family = 6 Model = f Stepping = 6 | ||
Features= | Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> | ||
Features2= | Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> | ||
AMD Features= | AMD Features=0x20100800<SYSCALL,NX,LM> | ||
AMD Features2= | AMD Features2=0x1<LAHF> | ||
real memory = | TSC: P-state invariant, performance statistics | ||
avail memory = | real memory = 8589934592 (8192 MB) | ||
avail memory = 8165134336 (7786 MB) | |||
Event timer "LAPIC" quality 400 | Event timer "LAPIC" quality 400 | ||
ACPI APIC Table: < | ACPI APIC Table: <INTEL DP35DP > | ||
ioapic0 <Version 2. | FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs | ||
FreeBSD/SMP: 1 package(s) x 2 core(s) | |||
cpu0 (BSP): APIC ID: 0 | |||
cpu1 (AP): APIC ID: 1 | |||
ioapic0: Changing APIC ID to 2 | |||
ioapic0 <Version 2.0> irqs 0-23 on motherboard | |||
kbd1 at kbdmux0 | kbd1 at kbdmux0 | ||
acpi0: < | acpi0: <INTEL DP35DP> on motherboard | ||
acpi0: Power Button (fixed) | acpi0: Power Button (fixed) | ||
cpu0: <ACPI CPU> on acpi0 | cpu0: <ACPI CPU> on acpi0 | ||
cpu1: <ACPI CPU> on acpi0 | |||
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 | |||
Event timer "RTC" frequency 32768 Hz quality 0 | |||
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 | |||
Timecounter "i8254" frequency 1193182 Hz quality 0 | |||
Event timer "i8254" frequency 1193182 Hz quality 100 | |||
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 | |||
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 | |||
acpi_button0: <Sleep Button> on acpi0 | |||
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 | ||
pci0: <ACPI PCI bus> on pcib0 | pci0: <ACPI PCI bus> on pcib0 | ||
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 | pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 | ||
pci1: <ACPI PCI bus> on pcib1 | pci1: <ACPI PCI bus> on pcib1 | ||
vgapci0: <VGA-compatible display> port | vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 on pci1 | ||
pcib2: <ACPI PCI-PCI bridge> at device | pci0: <simple comms> at device 3.0 (no driver attached) | ||
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x3400-0x341f mem 0xe3100000-0xe311ffff,0xe3120000-0xe3120fff irq 20 at device 25.0 on pci0 | |||
em0: Using an MSI interrupt | |||
em0: Ethernet address: 00:1c:c0:60:f2:9a | |||
uhci0: <Intel 82801I (ICH9) USB controller> port 0x30e0-0x30ff irq 18 at device 26.0 on pci0 | |||
uhci0: LegSup = 0x2f00 | |||
usbus0 on uhci0 | |||
uhci1: <Intel 82801I (ICH9) USB controller> port 0x30c0-0x30df irq 21 at device 26.1 on pci0 | |||
uhci1: LegSup = 0x2f00 | |||
usbus1 on uhci1 | |||
uhci2: <Intel 82801I (ICH9) USB controller> port 0x30a0-0x30bf irq 17 at device 26.2 on pci0 | |||
uhci2: LegSup = 0x2f00 | |||
usbus2 on uhci2 | |||
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe3121c00-0xe3121fff irq 17 at device 26.7 on pci0 | |||
usbus3: EHCI version 1.0 | |||
usbus3 on ehci0 | |||
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 | |||
pci2: <ACPI PCI bus> on pcib2 | pci2: <ACPI PCI bus> on pcib2 | ||
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 | |||
pci3: <ACPI PCI bus> on pcib3 | |||
atapci0: <Marvell 88SE6101 UDMA133 controller> port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0xe3000000-0xe30001ff irq 17 at device 0.0 on pci3 | |||
ata2: <ATA channel> at channel 0 on atapci0 | |||
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0 | |||
pci4: <ACPI PCI bus> on pcib4 | |||
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0 | |||
pci5: <ACPI PCI bus> on pcib5 | |||
ahci0: < | pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0 | ||
ahci0: AHCI v1. | pci6: <ACPI PCI bus> on pcib6 | ||
uhci3: <Intel 82801I (ICH9) USB controller> port 0x3080-0x309f irq 23 at device 29.0 on pci0 | |||
uhci3: LegSup = 0x2f00 | |||
usbus4 on uhci3 | |||
uhci4: <Intel 82801I (ICH9) USB controller> port 0x3060-0x307f irq 19 at device 29.1 on pci0 | |||
uhci4: LegSup = 0x2f00 | |||
usbus5 on uhci4 | |||
uhci5: <Intel 82801I (ICH9) USB controller> port 0x3040-0x305f irq 18 at device 29.2 on pci0 | |||
uhci5: LegSup = 0x2f00 | |||
usbus6 on uhci5 | |||
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe3121800-0xe3121bff irq 23 at device 29.7 on pci0 | |||
usbus7: EHCI version 1.0 | |||
usbus7 on ehci1 | |||
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 | |||
pci7: <ACPI PCI bus> on pcib7 | |||
isab0: <PCI-ISA bridge> at device 31.0 on pci0 | |||
isa0: <ISA bus> on isab0 | |||
ahci0: <Intel ICH9 AHCI SATA controller> port 0x3428-0x342f,0x3434-0x3437,0x3420-0x3427,0x3430-0x3433,0x3020-0x303f mem 0xe3121000-0xe31217ff irq 21 at device 31.2 on pci0 | |||
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported | |||
ahcich0: <AHCI channel> at channel 0 on ahci0 | ahcich0: <AHCI channel> at channel 0 on ahci0 | ||
ahcich1: <AHCI channel> at channel 1 on ahci0 | ahcich1: <AHCI channel> at channel 1 on ahci0 | ||
ahcich2: <AHCI channel> at channel 2 on ahci0 | ahcich2: <AHCI channel> at channel 2 on ahci0 | ||
ahcich3: <AHCI channel> at channel 3 on ahci0 | ahcich3: <AHCI channel> at channel 3 on ahci0 | ||
ahcich4: <AHCI channel> at channel 4 on ahci0 | |||
ahcich5: <AHCI channel> at channel 5 on ahci0 | |||
pci0: <serial bus, SMBus> at device 31.3 (no driver attached) | |||
orm0: <ISA Option ROMs> at iomem 0xd0800-0xd17ff,0xd1800-0xd27ff on isa0 | |||
sc0: <System console> at flags 0x100 on isa0 | |||
sc0: VGA <16 virtual consoles, flags=0x300> | |||
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 | |||
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 | |||
pci0: <serial bus, SMBus> at device | |||
isa0 | |||
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 | |||
atkbd0: <AT Keyboard> irq 1 on atkbdc0 | atkbd0: <AT Keyboard> irq 1 on atkbdc0 | ||
kbd0 at atkbd0 | kbd0 at atkbd0 | ||
atkbd0: [GIANT-LOCKED] | atkbd0: [GIANT-LOCKED] | ||
ppc0: cannot reserve I/O port range | ppc0: cannot reserve I/O port range | ||
uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 | |||
ctl: CAM Target Layer loaded | |||
est0: <Enhanced SpeedStep Frequency Control> on cpu0 | |||
p4tcc0: <CPU Frequency Thermal Control> on cpu0 | |||
est1: <Enhanced SpeedStep Frequency Control> on cpu1 | |||
p4tcc1: <CPU Frequency Thermal Control> on cpu1 | |||
ZFS filesystem version 5 | |||
ZFS storage pool version 28 | |||
Timecounters tick every 1.000 msec | Timecounters tick every 1.000 msec | ||
usbus0: 12Mbps Full Speed USB v1.0 | usbus0: 12Mbps Full Speed USB v1.0 | ||
usbus1: 12Mbps Full Speed USB v1.0 | usbus1: 12Mbps Full Speed USB v1.0 | ||
usbus2: 12Mbps Full Speed USB v1.0 | usbus2: 12Mbps Full Speed USB v1.0 | ||
usbus3: | usbus3: 480Mbps High Speed USB v2.0 | ||
usbus4: 12Mbps Full Speed USB v1.0 | usbus4: 12Mbps Full Speed USB v1.0 | ||
usbus5: 480Mbps High Speed USB v2.0 | usbus5: 12Mbps Full Speed USB v1.0 | ||
ugen0.1: < | usbus6: 12Mbps Full Speed USB v1.0 | ||
uhub0: < | usbus7: 480Mbps High Speed USB v2.0 | ||
ugen1.1: < | ugen0.1: <Intel> at usbus0 | ||
uhub1: < | uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 | ||
ugen2.1: < | ugen1.1: <Intel> at usbus1 | ||
uhub2: < | uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 | ||
ugen3.1: < | ugen2.1: <Intel> at usbus2 | ||
uhub3: < | uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 | ||
ugen4.1: < | ugen3.1: <Intel> at usbus3 | ||
uhub4: < | uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 | ||
ugen5.1: < | ugen4.1: <Intel> at usbus4 | ||
uhub5: < | uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 | ||
ada0 at ahcich0 bus 0 | ugen5.1: <Intel> at usbus5 | ||
ada0: < | uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 | ||
ugen6.1: <Intel> at usbus6 | |||
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 | |||
ugen7.1: <Intel> at usbus7 | |||
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 | |||
uhub0: 2 ports with 2 removable, self powered | |||
uhub1: 2 ports with 2 removable, self powered | |||
uhub2: 2 ports with 2 removable, self powered | |||
uhub4: 2 ports with 2 removable, self powered | |||
uhub5: 2 ports with 2 removable, self powered | |||
uhub6: 2 ports with 2 removable, self powered | |||
uhub3: 6 ports with 6 removable, self powered | |||
uhub7: 6 ports with 6 removable, self powered | |||
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 | |||
ada0: <ST3400620NS 3.AEG> ATA-7 SATA 2.x device | |||
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ||
ada0: Command Queueing enabled | ada0: Command Queueing enabled | ||
ada0: | ada0: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C) | ||
ada0: Previously was known as | ada0: Previously was known as ad6 | ||
ada1 at ahcich1 bus 0 | ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 | ||
ada1: < | ada1: <ST3400620NS 3.AEG> ATA-7 SATA 2.x device | ||
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ||
ada1: Command Queueing enabled | ada1: Command Queueing enabled | ||
ada1: | ada1: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C) | ||
ada1: Previously was known as | ada1: Previously was known as ad8 | ||
ada2 at ahcich2 bus 0 | ada2 at ahcich2 bus 0 scbus3 target 0 lun 0 | ||
ada2: < | ada2: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device | ||
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ||
ada2: Command Queueing enabled | ada2: Command Queueing enabled | ||
ada2: | ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) | ||
ada2: Previously was known as | ada2: Previously was known as ad10 | ||
ada3 at ahcich3 bus 0 | ada3 at ahcich3 bus 0 scbus4 target 0 lun 0 | ||
ada3: < | ada3: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device | ||
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ||
ada3: Command Queueing enabled | ada3: Command Queueing enabled | ||
ada3: | ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) | ||
ada3: Previously was known as | ada3: Previously was known as ad12 | ||
ada4 at | ada4 at ahcich4 bus 0 scbus5 target 0 lun 0 | ||
ada4: < | ada4: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device | ||
ada4: | ugen2.2: <vendor 0x046a> at usbus2 | ||
ada4: | ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | ||
ada4: Previously was known as | ada4: Command Queueing enabled | ||
ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) | |||
ada4: Previously was known as ad14 | |||
ada5 at ahcich5 bus 0 scbus6 target 0 lun 0 | |||
ada5: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device | |||
ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) | |||
ada5: Command Queueing enabled | |||
ada5: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) | |||
ada5: Previously was known as ad16 | |||
cd0 at ata2 bus 0 scbus0 target 1 lun 0 | |||
cd0: <TEAC CD-224E-N 1.AA> Removable CD-ROM SCSI-0 device | |||
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) | |||
Trying to mount root from | cd0: Attempt to query device size failed: NOT READY, Medium not present | ||
SMP: AP CPU #1 Launched! | |||
Timecounter "TSC-low" frequency 9375531 Hz quality 1000 | |||
ukbd0: <vendor 0x046a product 0x0011, class 0/0, rev 2.00/1.00, addr 2> on usbus2 | |||
kbd2 at ukbd0 | |||
Trying to mount root from zfs:zroot/ROOT []... | |||
</pre> | </pre> |
Aktuelle Version vom 9. April 2022, 14:46 Uhr
Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2400.14-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Family = 6 Model = f Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8165134336 (7786 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <INTEL DP35DP > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <INTEL DP35DP> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x2000-0x207f mem 0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 on pci1 pci0: <simple comms> at device 3.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x3400-0x341f mem 0xe3100000-0xe311ffff,0xe3120000-0xe3120fff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: 00:1c:c0:60:f2:9a uhci0: <Intel 82801I (ICH9) USB controller> port 0x30e0-0x30ff irq 18 at device 26.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 uhci1: <Intel 82801I (ICH9) USB controller> port 0x30c0-0x30df irq 21 at device 26.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 uhci2: <Intel 82801I (ICH9) USB controller> port 0x30a0-0x30bf irq 17 at device 26.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe3121c00-0xe3121fff irq 17 at device 26.7 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 atapci0: <Marvell 88SE6101 UDMA133 controller> port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0xe3000000-0xe30001ff irq 17 at device 0.0 on pci3 ata2: <ATA channel> at channel 0 on atapci0 pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci6: <ACPI PCI bus> on pcib6 uhci3: <Intel 82801I (ICH9) USB controller> port 0x3080-0x309f irq 23 at device 29.0 on pci0 uhci3: LegSup = 0x2f00 usbus4 on uhci3 uhci4: <Intel 82801I (ICH9) USB controller> port 0x3060-0x307f irq 19 at device 29.1 on pci0 uhci4: LegSup = 0x2f00 usbus5 on uhci4 uhci5: <Intel 82801I (ICH9) USB controller> port 0x3040-0x305f irq 18 at device 29.2 on pci0 uhci5: LegSup = 0x2f00 usbus6 on uhci5 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xe3121800-0xe3121bff irq 23 at device 29.7 on pci0 usbus7: EHCI version 1.0 usbus7 on ehci1 pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci7: <ACPI PCI bus> on pcib7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel ICH9 AHCI SATA controller> port 0x3428-0x342f,0x3434-0x3437,0x3420-0x3427,0x3430-0x3433,0x3020-0x303f mem 0xe3121000-0xe31217ff irq 21 at device 31.2 on pci0 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) orm0: <ISA Option ROMs> at iomem 0xd0800-0xd17ff,0xd1800-0xd27ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 ctl: CAM Target Layer loaded est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 ZFS filesystem version 5 ZFS storage pool version 28 Timecounters tick every 1.000 msec usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <Intel> at usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <Intel> at usbus6 uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <Intel> at usbus7 uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub3: 6 ports with 6 removable, self powered uhub7: 6 ports with 6 removable, self powered ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <ST3400620NS 3.AEG> ATA-7 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad6 ada1 at ahcich1 bus 0 scbus2 target 0 lun 0 ada1: <ST3400620NS 3.AEG> ATA-7 SATA 2.x device ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 381554MB (781422768 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad8 ada2 at ahcich2 bus 0 scbus3 target 0 lun 0 ada2: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad10 ada3 at ahcich3 bus 0 scbus4 target 0 lun 0 ada3: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad12 ada4 at ahcich4 bus 0 scbus5 target 0 lun 0 ada4: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device ugen2.2: <vendor 0x046a> at usbus2 ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada4: Previously was known as ad14 ada5 at ahcich5 bus 0 scbus6 target 0 lun 0 ada5: <WDC WD2003FYYS-02W0B1 01.01D02> ATA-8 SATA 2.x device ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada5: Previously was known as ad16 cd0 at ata2 bus 0 scbus0 target 1 lun 0 cd0: <TEAC CD-224E-N 1.AA> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present SMP: AP CPU #1 Launched! Timecounter "TSC-low" frequency 9375531 Hz quality 1000 ukbd0: <vendor 0x046a product 0x0011, class 0/0, rev 2.00/1.00, addr 2> on usbus2 kbd2 at ukbd0 Trying to mount root from zfs:zroot/ROOT []...